Painting

I have never enjoyed painting, in fact I will do just about anything to avoid it. Luckily Ngai likes painting.

The cobweb is not meant to be symbolic of the speed of painting.

Rear Door/Canopy

Although it was Christmas, it was also one of the longest days of the year (at least in the southern hemisphere) so a chance to get lots done besides eating, drinking and socialising. Today's task was to 'dry' fit the rear door that is also the support for the rear canopy. It was 'all hands on deck' to get it into place and mark drill holes for the hinges. Although it is summer here it was a chilly afternoon so the workers were keen to finish and get inside.

My HighTech lifting device worked a treat.

The test fit highlighted a little problem in that the door was about 20mm too long. This meant cutting and re-welding the steel. Not a great problem as I have come to enjoy welding.

I had originally fabricated the door in 25mm square 3.2mm hollow steel but felt it was too heavy and went with the suggestion of the engineering supply company of  12mm x 25mm x 1.5mm hollow steel. My first thought was that it felt too light to hold up the awning that I plan to attach to it but with the aluminium sheet attached it may be better. We shall see.

Sometimes it's the little things...

I bought a new tape measure and wanted one with a magnetic end as I had seen someone else use one and thought it would be good. I am using quite a bit of steel so... extra useful there.

 The first model we found was around $40, a little more than I wanted to spend. After an extensive search of the tape measure display we found this one at just $8

The little magnet work well, and since I am now without Dad's extra pair of hands, it makes the job so much easier. It is a Stanley LeverLock and has a self-locking feature that is proving useful and easy to get used to.
Great little device.

Interior lining

Before the beds can be installed I need to line the walls. A helpful retailer suggested 3mm MDF board. It is light, easy to work with and not expensive especially compared to other options. Cutting the holes for the windows was a bit of a pain, the old adage 'measure twice and cut once' should have been more strictly adhered too, it would have saved quite a bit of time and materials.

I have bought two sheets of 4.75mm MDF for the ceiling as I feel the 3mm will sag eventually.

Another door

The next door is ready to go on. The internal door is a bit heavy and I could have used a less heavy steel but at least it's solid. I decided to use clear polycarbonate for the top section to allow more light.

Doors on

With Dad home in Australia, it fell to Molly to help with putting the doors on. She is now an expert in handling a drill.

On the chassis

The job of lifting the camper back onto the chassis is a little bigger than taking if off because of the added weight.
Thankfully, friends nearby were happy to help.