Our planned Anzac Day trip to Lake Waikaremoana was curtailed just an hour into it.
Whilst going up a reasonably steep hill, the truck suddenly lost power. It would idle fine but as soon as a little accelerator was added it died. If I stepped on the accelerator hard it would roar into life.
I am mechanically challenged, but it seemed as if it were a carburettor problem and it felt as though the carby had two types of jets, one for low revs and one for high revs, the low revs causing the problem.
I managed to nurse it home and had a look through the factory service manual to find this motor has a carburettor with low and high flow jets, a primary and secondary for each. A trip to town to get some aerosol carby cleaner and the problem was sorted....sort of. It still run rough and hesitated on light throttle.
I asked Ongaonga Motors to clean and check the carby, which they did quickly and expertly and she runs just fine now. Marcus (the mechanic) said the carby 'was full of water and sh*t'. Hmmm this would explain the problems.
Wikipedia has this information on carburettors
http://en.wikipedia.org/wiki/Carburetor
Friday, 11 May 2012
Wednesday, 28 March 2012
East Coast New Zealand- Beautiful
![]() |
| Kaiaua Beach, East Coast New Zealand |
![]() |
| Freedom Camping in Gisborne |
![]() |
| Donneraille Park, Gisborne. |
I was impressed that there was no rubbish left at either location. Freedom camping doesn't necessarily mean a mess.
Sunday, 19 February 2012
Thursday, 16 February 2012
Wednesday, 15 February 2012
Running water
After too much time and effort trying to get a 12v pump system to work without leaks, I decided to go with a simple, and effective, hand pump. Cost $59.95
This meant the battery would only have to supply the LED lights, so a cheaper battery was required.
Also means that if you want a glass of water at 2am there isn't a pump making a huge noise.
This meant the battery would only have to supply the LED lights, so a cheaper battery was required.
Also means that if you want a glass of water at 2am there isn't a pump making a huge noise.
Monday, 6 February 2012
First over-night trip
Friday, 3 February 2012
Bench and sink
The bench for the sink and storage is partway done.
I used off-cuts of the 'ultrasign' board and plastic drawers from 'The Warehouse'. Nice and light.
Still have the plumbing to do and a step on the left side to get up to the bunk.
I used off-cuts of the 'ultrasign' board and plastic drawers from 'The Warehouse'. Nice and light.
Still have the plumbing to do and a step on the left side to get up to the bunk.
Subscribe to:
Posts (Atom)










